THIS is a 6 axis Mach3 USB/Ethernet dual interface board(EDG381) worked with Mach3.
Ethernet (using TCP/IP) or USB Full-speed connection.
100M Ethernet interface, built-in network transformer isolation, support long-distance wired connection. With the wireless router, the wireless connection between the PC (laptop) and the motion control board can be realized.
Up to 6 axes, 500kHz pulsing engine, which is suitable for the servo or stepping motor.
2 real-time Manual Pulse Generation(MPG) input ports for 2 MPG at the same time. When the MACH3 MPG is set in the multi-step mode, it has the same real-time performance as the CNC machining center, smoothly. The control board has no delay and the mechanical system performance is fully utilized.
18 general-purpose input, with particular indicators, the input signal states can clearly shows.
8 general-purpose output, It can be configured as: spindle clockwise / CCW / Mist / Flood / VB script programming control.
PWM signal spindle control or Step/Dir signal spindle control.
2 analog input ports for adjusting the machining speed / jog speed / spindle speed.
Status indicator LED can be useful to show the USB/Ethernet connection, and working stauts by flashing.
6 high-speed optocouplers(Dual Channel) with 10MHz, 28 general optocouplers for isolating all of the input/output signals, this high-cost design can be provided high performance and stable system.
Fully supporting all Mach3 versions, including the Mach3 R3.043.066 version. Supporting Windows series, including Windows XP-Windows10(32bit/64bit).
No need to install any USB drivers, it can be used after plugging in the computer.
Easy firmware update.
Provide a complete installation manual, illustrated, detailed description.
100M Ethernet interface / USB interface / Isolated power supply
Ethernet cable connection
USB cable connection
6-axis output signal (direction signal + step signal):
10MHz high-speed optocoupler isolation x12 channel
Optocoupler isolation PWM spindle speed control signal output x1
/ optocoupler isolation universal output x8
Power Input / Optocoupler Isolated NPN Input x16
External Adjustment Knob
Motion control board and PC connection
USB cable connection
Ethernet cable directly connected
Ethernet cable through the Router
WLAN (Wireless LAN)
Manual: Installation Manual(EDG381) Ver1.03 English(ZIP/9M) 2019/9/7
Plugin: eMotionMach3(V22.214.171.124).zip(ZIP/0.3M) 2019/8/22
Schematic: Upload later (ZIP file/0.1M)
POWER + Isolated Power